Help ID these wheels to find spigot rings

[scunnycougar]

Okay guys, cutting a long story short i need to id these wheels so I can find the requisit spigot rings.

I thought they were Ford wheels but it appears not.

I have had tyres properly balanced and still getting issues at speed.

Wheels are NOT buckled.

So, can anyone help please to id these wheels so i can get some spigot rings

Ta

 

[JJ]

Wolfrace I believe unsure which ones all you need to know is the bore diameter and hub diameter.

JJ

 

[scunnycougar]

i have some spigots from the wolfrace wheels that got knackered on the motorway, they don't fit

 

[JJ]

The bores will be different Si depends what they were for Peugeot and ford use same pcd but different bores.

JJ

 

[ScoobyRobbo]

http://www.revolution247.com/dezent-panik-76787-0.html

What do I win thankyou please? :beer:

 

[scunnycougar]

all the measurements appear to be the same as oem - the centre bore is 63.4 and the outer appears to be approximately 71.

Edit - good effort Dave, you win a date with Dean Windass

 

[ScoobyRobbo]

all the measurements appear to be the same as oem - the centre bore is 63.4 and the outer appears to be approximately 71.

Edit - good effort Dave, you win a date with Dean Windass

No thanks mate - wouldn't want him to two time you

These might be a start for bits if Revolution can help -

http://www.performancealloys.com/wheel-details.aspx?ID=1286

 

[scunnycougar]

ebay - correct measurements are 63.4 and 70.1....spigots are £1.50 each.

Nice work Dave....its worth a try

 

[ScoobyRobbo]

ebay - correct measurements are 63.4 and 70.1....spigots are £1.50 each.

Nice work Dave....its worth a try

No problem Si! Can I come out twat bashing with you now?

 

[scunnycougar]

sounds good

 

[V6SINGH]

Dave, you me and your dad should go down in a van as civvy support

 

[ScoobyRobbo]

Dave, you me and your dad should go down in a van as civvy support

What we need is a Tallywagon mate - Toyota Hilux with a mounted machinegun.......

 

[phil robbo]

Reckon this would do the job for us ..

 

[Procomm]

What we need is a Tallywagon mate - Toyota Hilux with a mounted machinegun.......

I have a 50cal gathering dust with 8,000 rounds

 

[scunnycougar]

gizzago

 

[Pid_16V]

Not the place for this is it guys .
Help ID these wheels to find spigot rings


back on topic or post in the appropriate forum!

 

[scunnycougar]

I know we have had the debate before about spigots etc....

but the centre bore and outer bore on the after market alloys appear to be exactly the same as the oem cougar alloys.

The after market alloys also appear to fit nicely and securely without any spigots.

Could their absence still cause the issues i am getting?

 

[cougarrsv]

You say you have had them balanced, could it be tracking that is causing your speed issues. I know mine had issues obove 70mph after I fitted aftermarket alloys, tracking sorted it.

PS - I'm also running without spigots as I didn't get any with the wheels. Not having any probs without them.

 

[scunnycougar]

balancing/tracking all sorted, wheels are round and not buckled

 

[phil robbo]

I know we have had the debate before about spigots etc....

but the centre bore and outer bore on the after market alloys appear to be exactly the same as the oem cougar alloys.

Don`t the original cougar wheels have spiggot rings, its a few years since we had originals but I kind of recall them having spigot rings ....... or am I just senile ?