Rebirth of my COUGAR (WIP)

[Procomm]

for some strange reason the zetecs aluminium one is .25g heavier than the V6 but the steel ones are the same

price list here, take a seat Al

http://www.coordsport.com/attachments/Fidanza-Flywheels-2010-Retail-Price-List.pdf

 

[Pid_16V]

Ouch!
Thanks for the info Paul, but i think that has to go on the backburner for a while.

 

[Procomm]

I did warn you to sit down mate

 

[ScoobyRobbo]

Mmm, must be worth a punt this Can you pm some details Dave.

PM sent mate

TD04 -

 

[scunnycougar]

ooooh, i hope this can be pulled off.

 

[phil robbo]

Go for it Alan

 

[Pid_16V]

No pm yet Dave

 

[Sabre Tooth]

Al........watch yourself:stop:...................they're trying to turn your coog into a scooby..............one piece at a time...............sneaky...............or you'll wake up one morning, to a Scougaru parked on yer drive.

 

[Pid_16V]

Al........watch yourself:stop:...................they're trying to turn your coog into a scooby..............one piece at a time...............sneaky...............or you'll wake up one morning, to a Scougaru parked on yer drive.

No chance of that mate, although a blower would be nice

Well not much done today, i was expecting the cambelt kit, but it didn't arrive till about 6'30pm, by which time i had washed up and tooled up.
I did get the new waterpump installed, and the new rear crankshaft oil seal. Also cleaned, repainted and replaced the oil breather/seperater. Just a couple of piccies to add into post #1

 

[Pid_16V]

No Spam in this thread please :beer:

 

[pauldf1971]

self moderated lol,couldnt resist it but would be good achievment if you could manage to squeeze that mod in then you could use your visteon scoop as a proper intake

 

[TopCat1127]

Roof mounted intercooler........mmmmmmmmmmm ;-)

Seriously Al, get a length of pipe and i'll knock it up, it wont be rolled tho, but cut and welded works just as well ;-) done some before hehehe

 

[Pid_16V]

Roof mounted intercooler........mmmmmmmmmmm ;-)

Seriously Al, get a length of pipe and i'll knock it up, it wont be rolled tho, but cut and welded works just as well ;-) done some before hehehe

Now i'm intrigued , do tell me more

 

[TopCat1127]

Hahaha RS200 stylie!!! ;-)
Cant do the intercooler, but i can do your pipework for the zorst ;-)

 

[Pid_16V]

Nice, i'll be in touch mate

 

[pauldf1971]

dont know if you could do the td mondeo mark ll intercooler setup which was mounted flat and the bonnet had an internal scoop from the grill between the heat insulation and bonnet to the intercooler

 

[stephen cbr600]

its like watching that program on tv "a car is born" hats off to you guys who are able to do these things to your own cars, me on the other hand will stick to well within my limitations ie puttin the petrol in n asking for help.. good luck to you fella but im thinking its more skill than luck....

 

[ScoobyRobbo]

PM resent Alan - too many stored messages so didn't send

I'd mount the intercooler infront of the radiator - theres a nice big air dam ready made for at the bottom! Would avoid the top mount intercooler if you can, and keep the I/C pipework as short as possible.

 

[pauldf1971]

i take it more heat from a top mounted cooler then dave?

 

[ScoobyRobbo]

i take it more heat from a top mounted cooler then dave?

Yeah mate - fine when you're moving with plenty of air flow but after you've been stopped for a minute or two or crawling along in traffic the I/C gets pretty warm.