Scrapyard Cougar

backseateducation

backseateducation

Club Moderator
Feb 1, 2014
15,678
16,587
Cornwall
Hopefully on Tuesday I'll be off to seee a Frosty V6 in a local scrappy.
Anything I can get for anyone - nothing too major please as I'm a mechanical spazzo:LOL:
 
Andy said he asked for me I'm Dan need a few bits and bobs stereo plugs and about 6 inches or more of loom someone chopped mine please be really grateful oh would love a cigarette lighter Aswell lmfao small things lol
 
grimisuk said:
Looking for a brake wear connector, Someone chopped mine off :eek:
Click to expand...

He's going to have to do the same (with enough cable) because of the way it's loomed, then we'll have to solder it on to the tails that are left on your car...

Matt, can you also pull the cam position sensor, mate? It's near the top of the chain cover on the front bank.

1240655392-camsensor.jpg
 
Mako said:
He's going to have to do the same (with enough cable) because of the way it's loomed, then we'll have to solder it on to the tails that are left on your car...

Matt, can you also pull the cam position sensor, mate? It's near the top of the chain cover on the front bank.

View attachment 6049
Click to expand...

Thanks Chris (y)
And Matt if you can get these (y)
 
Any more for any more?
I'm not sure how I'll get on with the pad wear sensors as the wheels are on and I've got nothing to raise the car or balance it on. I'll see how I go.
 
No, we're good as long as you get that CamPS for Paul.

Tiger has parts from club cars. She doesn't need necro parts from dead ones yet.
 
backseateducation said:
Any more for any more?
I'm not sure how I'll get on with the pad wear sensors as the wheels are on and I've got nothing to raise the car or balance it on. I'll see how I go.
Click to expand...


It might have it's own jack and brace in the boot Matt.

Only the passenger side had a pad-wear sensor at the front and being a W reg it might not have any.
 
Thanks mate. At least there isn't one at each corner! That's something I didn't know. Is there some kind of plug somewhere, or is cutting it out the only option?
 
Both rear ones have a sensor, by there's only one on the front.

This may be nearside or offside. There doesn't seem to be any logic to it unfortunately, though it's usually nearside on early ones and offside on later ones.

Tiger is a W-reg and hers is on the offside.
 
Hi Matt
I'm searching for a couple of front foglight plugs/looms for D1CKL without much luck. Can you snip them off the scrapper please mate. You can get to them through the access holes under the splash guard. (y)
 
You must log in or register to reply here.